FREE shipping on orders over US$200 
770nm~1050nm AR-Coated PM FC Fiber Patch Cable
FiberLife offers PM780-HP fibers with AR-coated FC/PC connectors on one end and uncoated FC/PC or FC/APC connectors on the other end. AR coatings are designed to minimize reflections when a beam is emitted into free space or coupled into free space. Coated connectors provide an average reflectance of less than 0.5% over the specified wavelength range without affecting the extinction ratio of the fiber (see the AR Coatings tab for a plot of reflectance versus wavelength).
$176.00
770nm~1050nm Polarization Maintaining PM AR-Coated FC Fiber Patch Cable
FiberLife offers polarization-maintaining fibers with AR-coated FC/PC connectors on one end and uncoated FC/PC or FC/APC connectors on the other end. AR coatings are designed to minimize reflections when a beam is emitted into free space or coupled into free space. Coated connectors provide an average reflectance of less than 0.5% over the specified wavelength range without affecting the extinction ratio of the fiber (see the AR Coatings tab for a plot of reflectance versus wavelength).
These patch cables feature Kevlar’s FT030-BLUE Ø3 mm reinforced furcation tubing, making them ideal for use with our fiber collimators and FiberPort collimators/couplers. AR-coated connectors are distinguished by a black connector boot and are marked with the letter “A” on the sleeve near the connector. Two protective caps are included with each patch cable to protect the ferrule ends from dust and other damaging factors.
There are several ways to clean AR-coated connector ends without damaging the coating. Gently spraying the connector ends with compressed air is ideal. Other methods include gently wiping with isopropyl alcohol or methanol on a lint-free optical wipe or a fiber connector cleaner. However, do not use dry wipes, as this may damage the AR coating.
| AR-Coated Connector | Uncoated Connector | Anti-Reflection Coating | AR-Coating Reflectivity |
|---|---|---|---|
| FC/PC | FC/PC | Ravg < 0.5% for 650 – 1050 nm |  |
| FC/PC | FC/APC |
| Fiber Type | Bare Fiber Wavelength Range | Cut-Off Wavelength | Mode Field Diameter | Minimum Extinction Ratio | Maximum Insertion Loss | Maximum Attenuation | Numerical Aperture | Length | Jacket |
|---|---|---|---|---|---|---|---|---|---|
| PM780-HP | 770-1100 nm | 710 ± 60 nm |
4.9 ± 0.5 µm @ 780 nm 5.3 ± 1.0 µm @ 850 nm |
20 dB | 1.0 dB |
< 4 dB/km @ 850 nm |
0.12 | 2 m | FT030-BLUE (Ø3 mm) |
Related Products
FiberLife offers PM980-XP fibers with AR-coated FC/PC connectors on one end and uncoated FC/PC or FC/APC connectors on the other end. AR coatings are designed to minimize reflections when a beam is emitted into free space or coupled into free space. Coated connectors provide an average reflectance of less than 0.5% over the specified wavelength range without affecting the extinction ratio of the fiber (see the AR Coatings tab for a plot of reflectance versus wavelength).
1310/1480/1550nm Polarization Maintaining (PM) Fiber Patch Cable, Slow Axis Working is specially designed for polarization-sensitive applications across the 1310nm, 1480nm, and 1550nm wavelengths. Utilizing slow-axis working PM fiber, it provides high extinction ratio, low insertion loss, and excellent optical stability, ensuring reliable signal transmission in demanding environments.
FiberLife offers PM630-HP fibers with AR-coated FC/PC connectors on one end and uncoated FC/PC or FC/APC connectors on the other end. AR coatings are designed to minimize reflections when a beam is emitted into free space or coupled into free space. Coated connectors provide an average reflectance of less than 0.5% over the specified wavelength range without affecting the extinction ratio of the fiber (see the AR Coatings tab for a plot of reflectance versus wavelength).
850nm Polarization Maintaining (PM) Fiber Patch Cable, Slow Axis Working is designed for polarization-sensitive applications operating at the 850nm wavelength. Built with slow-axis working PM fiber, it ensures a high extinction ratio, low insertion loss, and stable optical performance, making it ideal for use in quantum communication, fiber optic sensing, interferometry, and biomedical imaging systems.
980/1060nm Polarization Maintaining (PM) Fiber Patch Cable, Slow Axis Working is engineered for high-precision optical applications requiring stable polarization performance at 980nm and 1060nm. Built with slow-axis working PM fiber, it ensures high extinction ratio, low insertion loss, and excellent repeatability, making it ideal for use in fiber optic sensing, interferometry, fiber laser systems, and polarization-sensitive measurement setups.
FiberLife offers PM1550-XP fibers with AR-coated FC/PC connectors on one end and uncoated FC/PC or FC/APC connectors on the other end. AR coatings are designed to minimize reflections when a beam is emitted into free space or coupled into free space. Coated connectors provide an average reflectance of less than 0.5% over the specified wavelength range without affecting the extinction ratio of the fiber (see the AR Coatings tab for a plot of reflectance versus wavelength).
Reviews
There are no reviews yet.